As of 7/15/24 kits will no longer come with a BOV on the charge pipe and are not required to run this kit properly.
 
WHAT IS INCLUDED:
 
1.) Turbo
2.) Wastegates  TS 40mm
3.) Coupler [3″] OR [2.5-3″]
4.) Hose clamps [(2)X3″] OR [(1)X2.5″/(1) X3″]
5.) Manifold True Twin Scroll T4 Divided Dual Wastegate
6.) 3.5″ Down Pipe
7.) Dump Tubes (X2)
8.) Intercooler Piping with 3 Weld Fittings
9.) 3″ Pro Clamp Full Assembly
10.) Vband Clamp for Down Pipe
11.) Turbo Studs & Turbo Gasket (Trimed Studs)
12.) 10AN Nylon Braid Hose (X2 Feet)
13.) 10AN Hose end Fitting 1 X 45Degree
14.) 10 AN Hose end fitting 1 X 90 degree
15.) Stainless Braid Oil feed Line 2 Feet Vibrant
16.) Silicon Vacuum Hose (X 4 Feet)
17.) Heat Shield with M8x16mm (X2)
18.) 4AN to 4AN 90 Degree Oil Feed Fitting
19.) Oil Return Block Fitting 10AN (use factory bolt and O-ring)
20.) Oil Feed Block Fitting 4AN (use factory bolt and O-ring)
21.) Coolant Block Off Front (use factory bolt and O-ring)
22.) Coolant Block Off Back
23.) Turbo Oil Drain Fitting / with Bolts (qty.2)
24.) M6x12mm Bolts for Intercooler Piping (X3) one for map
25.) Heat Tape (20 Inches)
26.) Vacuum T Fittings (X1)
27.) Stickers and Licenses Plate Frame
28.) 1/8″ NPT Plugs (x2)
29.) Turbo drain and feed line heat sleeve
30.) Vacuum line heat sleeve